Intsa360 GO Ultra Pivot Stand
Details
Compatible models
- With its reusable adhesive base, the camera can be mounted anywhere.
- The flexible base can be attached to flat or slightly curved surfaces. The new ergonomic design makes it easier to pick up and use.
- The universal 1/4-inch contact can be used with other accessories.
- Magnetic latch compatible with GO Ultra standalone camera and Action Pod.
- Adjustable ball head bracket, suitable for flexible shooting from multiple angles and creative angles.
| The content includes: Rotating bracket x1 |
GO Ultra Pivot Stand
Install anywhere, move freely. 
Unlock more creative angles and stick it anywhere you can imagine! Simply wash the adhesive base for reuse! A 1/4-inch screw hole on the bottom provides more installation options. 
*The adhesive base must be applied to a dry, flat, or slightly curved surface.
The one-piece design makes storage hassle-free; the flip-top base design allows the protective cover to be easily accessible. 
Securely attach to the Action Pod or use the camera alone and unleash your creativity! Magnetic locking clips ensure a secure connection and quick assembly/disassembly.
Adjust the angle as you like and create all sorts of possibilities. Easily change the angle with the adjustable ball head bracket to create endless shooting perspectives.
- The rotating stand contains magnets. Keep it away from heart pacemakers and other devices to avoid interference.
- Please read the instructions on the stand sticker carefully before use. Remove the sticker after reading.
- The rotating stand base can be detached, and other accessories, such as a selfie stick, can be connected via the 1/4" mounting point.
- The adhesive base is suitable for temperatures ranging from 0°C to 40°C (32°F to 104°F). Allow it to stand for 30 minutes after installation to achieve maximum strength.
- When removing the rotating bracket, lift it from the lifting plate on the base. Do not pull the rotating bracket directly.
- Attach the rotating bracket to a smooth surface such as glass or metal. Avoid using rough, uneven surfaces such as wood grain or concrete.
- Please attach it to a stable and smooth surface. Avoid mounting it on moving or vibrating surfaces, as this may cause the camera to fall.
- Do not leave it in high-temperature environments (such as car windshields) for extended periods, as this may make it difficult to remove the adhesive residue.
- The back of the camera is a heat dissipation area and may get hot during use. Avoid touching the camera when it is hot and allow it to cool down after use.
- When not in use, please cover the adhesive side with the protective cap to keep it clean. If the adhesiveness weakens, simply rinse with water and let it air dry to restore it.
- Avoid using during strenuous activities. Jumping or rapid spinning may cause it to slip off.
你也許有興趣看看...