Insta360 Motorcycle U-Bolt Mount Kit

Compatible models

Insta360 Motorcycle Tail Stick Kit
Insta360 Motorcycle U-Bolt Mount

A completely redesigned vehicle allows for more stable third-person shooting.

Applicable to most mainstream locomotives

Standard 1/4" adapter design, supports Insta360 Action Stealth Selfie Stick

Compatible with GO 2, requires a sports adapter frame.

Instructions for use:

Before first use

1. Loosen the universal joint by rotating the wing nut, then rotate the top until you see the internal hex head.

2. Align the bottom of the universal joint with the top of the U-bolt. Using an L-wrench, tighten clockwise until securely fastened.

3. Loosen the top nut of the U-bolt by rotating it counterclockwise. Use the appropriate washer according to the clamping position and your motorcycle, and then install the washer.

4. Remove the rubber pad from the kneader and fix it onto the gasket to obtain better friction.

5. Secure the washers and nuts in sequence. Tighten the nuts clockwise with a wrench.

How to use U-bolt accessories

1. Rotate the wing nut counterclockwise one full turn to adjust it to a horizontal position of 180°.

2. Rotate the wing nut counterclockwise two full turns, a 360° vertical rotation.

Product Specifications:

Materials: Aluminum alloy, zinc alloy

Weight: 201g

Dimensions: 96.5x51.5x57mm

Precautions:

1. Install the washer inside the U-bolt according to the clamping position and size.

2. Before use, tighten the universal joint firmly onto the U-bolt.

3. The included anti-slip nut washer set consists of two washers. Take care not to lose these washers during disassembly, as losing them may cause the nut to loosen under vibration.

4. U-bolts can be installed on the locomotive frame, rear footrest bracket, bumper, and other safety areas. Always ensure the U-bolts are securely locked in place and that there is no rotation or gap in the mounting bracket after installation.

5. Riding is recommended only on flat roads at speeds not exceeding 80 km/h (50 mph). Off-road riding is not supported.

6. It is recommended to connect the Insta360 High-Strength Invisible Selfie Stick to the 1/4" adapter on the universal joint to ensure the white selfie stick is securely installed. Do not connect the white selfie stick to other accessories. Do not force the top of the selfie stick, as excessive torque may damage the universal joint.

7. When the motorcycle is parked outdoors for an extended period of time, remove the accessories to keep it in optimal condition.

8. Please use the accessories according to the installation method in this instruction manual. Do not attempt to install them yourself. Damage caused by failure to follow the instructions is not covered by Insta360's warranty or replacement service.

One-year maintenance

Vast World Limited (Insta360's exclusive distributor in Hong Kong and Macau)

Insta360 Hong Kong After-Sales Service Center and Repair Service