Insta360 Ace Pro Dive Case

Water resistant to 60 meters (197 feet)

Glass lenses provide better image quality

Sliding buckle design keeps the camera safe and secure

Product Specifications

Weight: 118g

Package Contents

Diving case x 1

Carrying bag x 1

Anti-fog insert x 8

Anti-slip ring x 4

Instructions

1. Open the waterproof case

Push the locking lever to the right (①), then push the buckle downward as shown below (②) to release the buckle from the hook (③) and open the diving housing (④).

2. Install the anti-fog insert

Insert the anti-fog insert as shown below.
Please note:
When using third-party anti-fog inserts, please ensure that the size of anti-fog insert 1 is within 20x15x1.2mm and the size of anti-fog insert 2 is within 40x15x1.2mm. If the inserts are too large, it may cause water leakage and damage the camera.

3. Plug in the camera

Make sure you insert the camera in the correct orientation so the buttons align correctly.

Please note:
1. When using the camera in water, please lock the touch screen to avoid accidental touches.
2. When inserting the camera, be careful not to scratch the lens.

4. Close the waterproof case

Lock the clasp onto the hook of the box and push down firmly until you hear a click.

Please note:

1. Make sure the housing is securely closed. Make sure there is no dirt or dust on the part of the housing that contacts its rubber seal.

2. For best results, please keep the lens of the diving housing clean.

5. Install anti-slip ring (if necessary)

When attaching the housing to other accessories (such as a floating handle), place the anti-stick on the screw points to reduce the risk of vibration loosening or damaging the housing.

Precautions

1. Before using the diving housing, please update the camera firmware to the latest version.

2. Improper maintenance may affect product performance. Each time before putting the camera into the diving housing, it is recommended to lock the diving housing (without the camera inserted) and immerse it in water to check for leaks.

3. Before sealing the housing, make sure that the part of the housing that contacts its rubber seal is free of any foreign matter (dirt, dust, sand, etc.). Make sure the rubber seal is properly aligned, broken or twisted.

4. The submersible housing is not impact-proof. Applying strong vibration, shock, or pressure to the product may cause damage, malfunction, or loss of waterproof performance. The maximum recommended diving height when submerged is 2 m (6.56 ft) above the water surface. The submersible housing protects the camera when it is dropped on a solid surface, with a maximum drop distance of 1 m (3.28 ft).

5. Do not open the diving case when it is wet.

6. After using the product in seawater, remove the camera and make sure the diving housing is securely closed. Soak the diving housing in fresh water for 5-10 minutes and then rinse it gently under the tap.

7. Do not store the diving case in a hot and humid environment, such as in a hot car. Do not use soap, neutral detergent, organic solvent or alcohol cleaning products to clean the diving case, as this may reduce the waterproof performance.