Skip to product information

Insta360 Floating Surfboard Mount
$319.00
Details
Compatible Models
X5 / X4 / X3
Ace Pro 2 / Ace Pro / Ace
GO 3S / GO 3 / GO 2
ONE RS (dual-lens/4K) / ONE X2 / ONE R / ONE X
Insta360 Buoyant Surfboard Mount
Insta360 Floating Surfboard Mount
- Unlock the best angle with a stand designed specifically for surfing.
- Floatable and non-sinking, it keeps your camera safe if it falls.
- Stable 3M™ Dual Lock™ Reclosable Fastener design provides extra protection.
- Strong 3M™ adhesive base provides superior water resistance and long-lasting durability.
Precautions
- The adhesive base has a very strong adhesive and may be difficult to remove from your surfboard. It cannot be reapplied once removed. Do not remove it after surfing; just leave it on your board.
- If you want to remove the adhesive mount, use a hair dryer to soften the adhesive and peel it off the edge of the mount. Do not use sharp objects to remove the mount as this may damage the board.
- When shooting with a GO 3/GO 3S, please use the GO 3/GO 3S Vertical and Horizontal Action Mount Kit to mount it to the Buoyancy Surfboard Mount. Do not use the GO 3/GO 3S Quick Release Mount, otherwise the camera may fall.
- Do not install GO 3/GO 3S together with Action Pod, otherwise it may affect the waterproof function. If you use Action Pod, please install GO 3/GO 3S diving case first.
- GO 3/GO 3S vertical and horizontal operation mounting kits and diving housings are not included in the box and can be purchased separately.
- Store the Buoyancy Surfboard Holder at -10°C to 60°C (50°F to 140°F) with humidity below 90%. Avoid excessive exposure to sunlight, which may weaken the adhesive bond.
- The Selfie Stick is not suitable for use with buoyant surfboard mounts and may cause the camera to fall.
- The triangular float prevents your camera from sinking. If it falls, the stand will float on the sea or wash up on the shore with your camera.
- If the silicone bracket or the triangular floating plate is washed off, please reinstall it for continued use.
- When surfing but not using the camera, remove the silicone mounts from the adhesive base or insert the thumb screws into the silicone mounts to prevent them from being washed away.
- Not recommended for use with Insta360 X3 or X4 multi-function frames.
- To enhance the stability of the camera, use the X4 Aspect Bracket in conjunction with the Buoyancy Surfboard Bracket and mount the X4 horizontally to lower the center of gravity. You can also use the quick-release bracket to quickly switch between horizontal and vertical mounting.
One year maintenance
Vast World Limited (Insta360 exclusive distributor in Hong Kong and Macau)
Insta360 Hong Kong After-sales Service Center and Repair Services
你也許有興趣看看...